Setting the Standard
Our range of perimeter security systems are continually evaluated by leading authorities, Test Houses and independent appraisals by Home Office and Government Departments. Home office evaluation reports are available for appropriate authorities.

Standards for Safety and Security
All components used for the construction of PulseSecure™ systems fully comply with all National and International Standards including BSEN 60335. In addition we have our own Installation Standards and Code of Practice. PulseSecure™ systems are designed to be fail safe and secure.

Compliance Certification
On completion every PulseSecure™ system is inspected for compliance with BSEN 60335 and Harper Chalice Group's Installation Standards and Code of Practice.

Quality Assured - Accredited Dealer Network
To ensure that PulseSecure™ systems are designed, installed and maintained to the appropriate standards, PulseSecure™ systems are only available via our network of "PulseSecure™ Perimeters Accredited Dealers". Our dealers are contractually bound and trained in the design, installation and maintenance of PulseSecure™ systems. Following completion of every PulseSecure™ installation, the new system is inspected and, providing compliant, a "Certificate of Compliance" is issued. This method of supply ensures that all systems are installed to the highest standards for optimum safety, security and reliability

PulseSecure™ Physical and Psychological barrier
PulseSecure™ pulsed electrified perimeter security systems provide total security and protection of the protected perimeter or boundary. The construction of the PulseSecure™ system creates a psychological and physical barrier through or over which would-be intruders would have to pass to achieve their objective. By design PulseSecure™ systems actively: -

Defend... Deter... Deny... Detect......... attempts to gain unauthorised access!

Active Deterrent and Detection
Would-be intruders who come into contact with the PulseSecure™ system are repelled by a SHORT, SHARP, REGULATED SAFE but PAINFUL electric shock. Any attempts to cut, load, short-circuit or tamper with the PulseSecure™ system are detected and alarms are generated.

Alarm Monitoring and Control
A real time event memory and alarm history log automatically records all events including the time and date when the system is armed, disarmed, and alarmed.

In the event of mains failure standby rechargeable batteries maintain the system armed for a minimum of 10 hours. (This period can easily extended for specific system or specification requirements).

Alarm relays are provided for each zone of protection for switching cameras, CCTV systems, security lighting or other local or remote alarm monitoring systems. Programmable electronic outputs are available for customised alarm requirements and mimic displays.

PulseSecure™ systems are ideal for use with CCTV remote monitoring and surveillance systems. PulseSecure™ controls have an open system architecture to allow PulseSecure™ security systems to be easily interfaced with other security systems, for full remote monitoring and control, including remote arming, disarming, system status and alarm reporting by zone.

Protector
The PulseSecure™ PROTECTOR system is a fully monitored double pole High and Low voltage electrified perimeter security system. The PROTECTOR low voltage monitoring system maintains perimeter security and fully monitors the PulseSecure™ system with the High voltage pulses switched on or off.

Commercial Property

Residential Property

Vehicle Storage Facilities

Logistics

High Security

Wall Top

Stand Alone Protection

Gates

Site Secure