WallSecure™

WallSecure™ perimeter security systems are state of the art.

WallSecure™ uses special SIDS™ analysers combined with VibeWire™ piezoelectric cable to create a fully monitored perimeter intrusion detection. SIDS™ systems can be used to protect entire walls, buildings and roof tops. The unobtrusive system can be applied to walls, floors and roofs to provide early warning of attack or intrusion.

WallSecure™ is designed for optimum security, efficiency, ease of installation and use.
The seismic detection system is operated by 12 to 24 v DC and is fully monitored and zoned.
WallSecure™ is the “Ultimate Seismic Perimeter Security System“, for safe and reliable protection of walls and roofs, to provide early detection of intrusion.
How WallSecure™ is applied:

VibeWire™ piezoelectric cable is applied to the walls or roof to be protected within a specially designed aluminium conduit. The conduit provides additional protection of the VibeWire™ whilst providing a secure method of fixing, which also enhances the detection characteristics of the system.

The WallSecure™ system will detect seismic noise and vibrations up to 2 metres from the VibeWire™ piezoelectric sensor cable.

Ease of Installation:

WallSecure™ has been designed with a complete range of installation accessories to simplify system design, installation planning and reduce installation time.

Depending on the structure being protected, the design and construction of the WallSecure™ system is adapted accordingly to provide optimum detection and system reliability.

For new build projects it is possible for the conduits containing the VibeWire™ piezoelectric sensor cable to be concealed within the walls or roof structures, for complete covert detection.

Where to use WallSecure™ :

WallSecure™ is used to provide complete perimeter protection of walls, roofs and floors to provide detection of intrusion through the fabric of protected perimeter areas. Unlike conventional intruder alarm volumetric detection systems WallSecure™ cannot be blocked or masked, making it ideal for warehouse and high security applications.

Depending on the materials used to construct the perimeter walls, roof or floor, the type and installation of the VibeWire™ piezoelectric sensor cable will vary accordingly.

Perimeters walls and areas protected by a single zone of WallSecure™ must be constructed of the same material and method.

If the construction of the area being protected changes it is necessary to start a new zone in order to optimise the system to the surface being protected.

Typical applications:

Setting the Standard:

We provide full manufactures product support, specification and installation planning advice. Full product training courses are available for training of approved installers. A commissioning service can also be provided, details of which are available upon request.